9150415
Nautix A88 : High strength formula for heavy fouling areas

A88 ex a3 caribean is a new technology high performance antifouling. A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailings over any type of vessel.
The selection of specific methacrylic copolymer formulated in conjunction with the exclusive CLR technology by Nautix of controlled leaching rate, result a long term selective, systemic and preventive action over the largest scope of fouling.
Nautix A88 can be applied on GRP, wood and steel hulls.

· 2 coats of A88 are recommended
· At 15°C : wait 3 hours between 2 coats and 3 hours before launching
· 8.5m²/Ltr per coat
· Packing: 2,5 L - 5 L - 20 L
· Thinner: Nautix DA - Max: 10 %
· Application methods: brush, roller, spray gun.

COLOURS : BLUE FRANCE, NAVY BLUE, BLACK, RED, GREY

 Recommended primers:
Adhesion: Nautix P1 or PO (1-pack) or epoxy primer HPE or PE (2 packs).
Osmosis prevention: Nautix PO (1 pack polyurethane resin – 4 coats minimum).
Protection: Nautix epoxy primer HPE or PE (4-5 coats minimum - sand with paper grade 150 between coats and before antifouling application).
Anti-corrosion primer for keel or steel boat: Nautix IA + PA - 1 pack polyurethane resin system.

Customer reviews:

Write the first Review!